Check the configuration in DeltaGUI matches your set-up. In DeltaGUI, select Configure > Preferences and go to ‘ArtNet & DMX’. For the exact representation, see the Delta User Guide for your version on our user portal.
Tick to enable ‘Output ArtNet Data’.
Check that the Art-Net NIC IP is the correct NIC to the Enttec box
Type in the correct Universe and SubNet for which Art-Net output should be enabled.
Note: if you tick ‘Enable TestMode’, Delta will send a message out to ALL channels available and so all your devices should respond. Untick this box to stop/reset. |
Page edited [d/m/y]: 19/03/2024