Appendix D: SMPTE/Transport Control Setup

<< Click to Display Table of Contents >>

Navigation:  Appendices >

Appendix D: SMPTE/Transport Control Setup

For Delta to listen to SMPTE LTC timecode (and play, stop, jog and shuttle from an external controller, accordingly) you must have one of the following:

1.An LTC timecode device that can generate SMPTE timecode (interfaced into Delta via Soundman, LTC Reader or Adrielec card).

Note: SoundMan and LTC Reader are listed as Local LTC in the dropdown menu. Adrielec would appear on the list separately if the card is detected.

or

2.A Midi (MTC) device (interfaced into Delta via suitable MIDI input port).

or

3.RS422 Sony 9-pin D Serial Connector (or RS232 connector with suitable cabling and adapter).

Note: earlier versions of Delta up to 2.6.50 also required a genlock licence (purchased with Delta).

 

Configure Delta for listening to an external 422 device

RS422 Transport Controls